Autocom Kit SP-A Instruction Manual

INSTRUCTIONMANUALIt is very important that you fully read and understand all ofthese instructions before installation and use.These parts are designed

Fitting the Bluetooth ModuleUnplug the headsets from the control unit,remove the battery cover and the batteries or bikepower lead. (Picture A).Turn t

3Setting the MODE selector switchSet the mode selector switch to Mode 2(pictures F and G) to make the audio affectother inputs as Aux 2 does.Set the m

4USING PART 2221 - REMOTE LEAD HOUSINGRecommended to be used when you bike power a Logic system.Position Part 2217 or 2218 into the remote housing as

5STEREO BLUETOOTH REMOTE MODULESPARTS 2223 AND 2224214Fitting the Bluetooth ModuleWith the single module the 3.5mm jack plug is inserted in one of the

6Aux 3 •designed for Rider’s Stereo PhoneAux 4 •designed for Stereo MusicIncoming audio is amplified only to the rider’s headset, but can be switched

7Each Bluetooth module is capable of being connected to 2 Bluetooth devices at the same time; 1 usingA2DP profile and 1 using headset profile.If you i

Autocom Products LimitedUnit 4, Tachbrook Link, Tachbrook Park Drive, Warwick CV34 6RH England.Telephone: +44 (0)1926 431249Fax: +44 (0)1926 431250 Em