Autocom AIR Instruction Manual download pdf (Page 6)

Autocom Air Helmet Fitting

To Fit Helmet Speakers and Microphone

1. Markinyourhelmetthepositionofyourear.Thiswillallowyoutotakethefulladvantageof

 thesystem’ssoundquality*.

2. RemovetheprotectivepaperfromthebackoftheVelcroxingpadsandplacethembelow

your markings in the helmet and apply pressure. Now place the speakers on the Velcro pads.

3. RoutethespeakercablestotheAirunitcableandconnecttotheYELLOWplugmarked“R”

 and“L”.

4. RemovetheappropriatehelmetpaddingandinstalltheAutocomBoomMicrophone,withthe

 microphoneelementcentrallypositioned,beigesideclosetothemouth.

5. RoutetheMicrophonecableandconnecttotheBLUEconnectorontheunit.**

*Thecloserthespeakersaretotheears,thebetterthequalityofthesound.Thespeakerscanbeplacedunderthe

foampaddingforbettercomfort.However,checkthispaddingdoesnotdegradethesoundquality.

**Foropenhelmetsakitisavailabletoprovideacoverforthemicrophonetohelpprotectagainstwindnoise.

To Fit Helmet Battery

1. Thebatteryshouldbettedwithinthepaddingofthehelmetinanyconvenientvoid.

2. RoutethebatterycableandconnecttotheREDconnectorontheAirunit.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Autocom AIR Instruction Manual Page 6