Autocom Kit L-IW Instruction Manual download pdf (Page 10)

10

View from underside

of three part type

helmet

View from

underside

of one part type

helmet

Remove

straps and

lift out complete

The fabric is either taped or

elasticated over the polystyrene

and so it is easy to install the

speakers behind the lining.

Note that the wire should come

out of the speaker towards the

back of the helmet.

Before replacing the cheek

pads, tape the boom and the

headset loom to the outer shell

or the back side of the cheek

pad. When the cheek pad is

fitted back into the helmet, it

will secure the boom and loom

inside the helmet.

Do not modify the helmet.

The fabric is either taped or

elasticated over the polystyrene

and so it is easy to install the

speakers behind the lining.

Note that the wire should come

out of the speaker towards the

back of the helmet.

Before replacing the cheek pad,

tape the boom and the headset

loom to the outer side of the

polystyrene. When the cheek

pad is fitted back into the

helmet, it will secure the boom

and loom inside the helmet.

Do not modify the helmet.

BASIC PRINCIPLE HOW HELMETS ARE ASSEMBLED

Three Part Inner Helmet Design

One Part Inner Helmet Design

Boom microphone

assembly

Peel back tape and lining, slide

speaker inside pushing it right

up to the strap hole

Return assembly as removed

Tape to hold in place

Remove

straps and lift out

each cheek pad

individually

Boom

microphone

assembly

Tape between cheek pad and

outer shell

Return assembly as removed

Kit LIW Instructions.qxd 5/6/09 2:03 pm Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments